Setting the units of measurement: Fuel
consumption
This function allows you to change the units of
measurement of the fuel consumption.
You open the "UNITS SETTING" menu, as described
on the previous pages. Select "CONSUMPTION"
option, by pressing button (1) or (2).
Once function is highlighted, press button (4). You
open the "CONSUMPTION" menu.
When you enter the function, the current unit of
measurement is displayed, followed by the list of the
possible units: L / 100km, km / L, mpg (UK), mpg
(USA).
Press buttons (1) and (2) to highlight the units of
measurement one by one: in particular, use button (1)
to highlight the following item and button (2) to
highlight the previous item.
Select the required unit of measurement and then
press the button (4) to confirm: the selected unit is
stored and the EXIT option is highlighted.
The selected unit of measurement will be used by the
instrument panel for the following indications:
km/L
km/L
km/L
mpg(UK)
mpg(UK)
mpg(USA)
mpg(USA)
L/100km
L/100km
CONSUMPTION
EXIT
EXIT
Fig. 91
147
To Next Page
Loading...
