SM/PM setting
Select "AM/PM" option, by pressing button (1) or (2).
Once highlighted, press CONFIRM MENU button (4).
The value will start flashing.
Select AM or PM option, by pressing button (1) or (2)
respectively.
Once you reach the value to be set, press CONFIRM
MENU button (4) and the set value will stop flashing.
To exit the menu and go back to previous page, select
EXIT and press button (4).
Note
Every time the battery is disconnected, the
clock is reset and must be set again by the user.
HOUR
CLOCK SETTING
MINUTE
10:57AM
AM/PM
EXIT
Fig. 104
HOUR
CLOCK SETTING
MINUTE
10:57AM
AM/PM
EXIT
Fig. 105
160
To Next Page
Loading...
