Teach-in procedure
When entering the function, the vehicle speed and
gear engaged are indicated on the right, while the
instructions on the required speed range and gear to
be engaged to correctly carry out the procedure are
displayed at the centre.
Speed range: 48 ÷ 52 km/h (and corresponding value
in mph if set unit of measurement is mph)
Gear: 2
The first page indicates READY in red at the top of the
display to warn the rider that the system is ready for
the calibration procedure.
When the rider complies with the required conditions
of vehicle speed and gear displayed, system
calibration will start and an orange IN PROGRESS
message will be displayed at the top.
If procedure is successfully completed, COMPLETED
message in green will come on at the top of the
display, and after a few seconds it will be
automatically replaced with the main screen.
START
DEFAULT
TIRE SETTING
EXIT
N
KEEP SPEED
AND GEAR 2
48 - 52
km/h
0
km /h
READY
2
KEEP SPEED
AND GEAR 2
48 - 52 km/h
40
km /h
IN PROGRESS
2
KEEP SPEED
AND GEAR 2
48 - 52 km/h
40
km /h
COMPLETED
Fig. 118
176
To Next Page
Loading...
