147
Dukane Manual Part No. 403–566–01
Section 15 – Specifications
FCC
The DPC II Plus complies with the following Fed-
eral Communications Commission regulations.
• The limits for FCC measurement procedure
MP-5, “Methods of Measurement of Radio
Noise Emissions from ISM Equipment”, pur-
suant to FCC Title 47 Part 18 for Ultrasonic
Equipment.
CE Marking
This mark on your equipment certifies that it meets
the requirements of the EU (European Union) con-
cerning interference causing equipment regulations.
CE stands for Conformité Europeéne (European
Conformity). The DPC II Plus complies with the
following CE requirements.
• The EMC Directive 89/336/EEC for heavy in-
dustry —
EN55011 and
EN50082 using
EN61000–4–2
EN61000–4–3
EN61000–4–4
EN61000–4–5
EN61000–4–6
EN61000–4–8
ENV50204
• The Low Voltage Directive 73/23/EEC.
• The Machine Directive 89/392/EEC using
EN60204–1:1993 Safety of Machinery –
Electrical Equipment of Machines. Part 1:
Specification for General Requirements.
Regulatory Agency Compliance
CAUTION
DO NOT make any
modifications to the
DPC or associated
cables as the changes
may result in violating
one or more regula-
tions under which this
equipment is manu-
factured.
To Next Page
Loading...
