24
No. Name Function
q Status Displays the current status or operating mode.
w Preset number Displays the preset Program (P) number.
e OPTION An "*" is displayed if the AF-100 is attached.
r BAR CODE When bar code reading is enabled "BC" is displayed; "- -" is displayed when
bar code reading is disabled.
t REGISTER MARK When using register marks reading is enabled "REG" is displayed; "- - -" is
displayed when register mark reading is disabled.
y AUTO CUT When using AUTO CUT is enabled "AC" is displayed; "- -" is displayed
when AUTO CUT is disabled.
u COUNTER Displays the number of pages processed.
15, 48
19
18
Part Names and Their Functions
Reference
page
LCD Panel
yt u
w e
q
r
[ RUN ] P–79
∗
BC REG AC
∗ ∗ ∗
Docu Cutter(HCEX) 2_18-25 03.12.8, 3:09 PM24
To Next Page
Loading...
