71
2
1
Appendix - DC545 HC/DC545 HCEX
Specifications
Paper Weight
The DC-545 was designed to process paper from 110 gsm up to 230 gsm (grams per square meter). 110 gsm is roughly
28 lb and 230 gsm equates to 10 pt stock.
Laminated Stock
The DC-545 was not designed to process laminated stock and therefore it is not recommended.
Paper Curl
Due to the automated slitter function design, the paper path of the DC-545 is sensitive to paper curl. The paper path
does not posses a flat table for the paper to travel over because the slitter units must be able to move freely from side-to-
side.
If paper curl is causing paper jams the following are suggestions for remedying the problem:
1. Adjust the printing devices de-curler (if available)
2. Manually de-curl the stock before loading in the feed tray
3. Turn the paper over (reprogramming the job may be necessary)
4. Use different paper stock
Product name / Model No. DC-545 with HCEX AUTO FEEDER
Input paper size Desktop model
Paper size Min.:8.5" x 11" / A4
Max.:12.6" x 18" / A3
Input paper weight Min.:110gsm
Max.:230gsm <No curl in the paper>
Finishing size Min.:2"(Width) x 3.5"(Length) <Business card size>
Lead edge trim Min.:0.125"(3.2mm)
Trail Edge Trim Min.:0.125"(3.2mm)
Side edge trim Min.:0.125'(3.2mm)
Max.:4.5"(114mm)
Speed Max : 9ppm (A4 lengthwise. 4-side trim. 1 score)
Trim/Score tolerance +/- 0.03"(+/- 0.762mm) <With paper cutting length not exceeding 18">
Media type Range: Regular copy paper to coated heavy weight paper
Feeding method Automatic Feeding (Air suction method)
Feed tray capacity 100mm
Stacker Drop type
Power supply
AC120V +/- 10% , 50/60Hz, 1.0A
AC230V +/- 10% , 50/60Hz, 0.6A*
Machine dimensions(mm) 1370(W) x 580(D) x 960(H)
Machine weight(kg) 109.6 (Main body 56.4 , Feeder 20.4 , Stand 32.8)
1.Four scores perpendicular to the feed direction.
Other Features
2.
Up to 6 cuts parallel to the feed direction. (2 x margin slitters and 4 x center slitters.)
3.Up to ten cuts perpendicular to the feed direction.
4.Automatic setting of slit, cut and score position.
DC-545 with HCEX AUTO FEEDER Specifications
Docu Cutter(HCEX) 6_70-84 03.12.8, 3:12 PM71
To Next Page
Loading...
Need help?
General
