Duplo DC-616 Instruction Manual

Driver Installation Procedures
15
Installing the PC Controller
2
“Device Driver Installation Wizard” starts.
Click [Next].
Read the Software License Agreement.
Select [I accept this agreement], and then click [Next].
REFERENCE
If Windows Security screen appears while installation
is in progress, select the [Always trust software from
“Duplo Seiko Corporation”.] check box and click
[Install] to proceed with the installation.
This software has been thoroughly tested and can be
used without any problems.
“Completing the Device Driver Installation Wizard”
screen appears.
Click [Finish].
This completes the installation.
IMPORTANT
Connect the DC-616 and your computer with a USB cable, and then turn ON the
DC-616.
USB cable (type AB): The cable length must be 3 m or shorter.

Duplo DC-616 Specifications

General

Brand	Duplo
Model	DC-616
Category	Paper Cutters
Language	English