46
PC Controller Setting
PC Controller Setting
Click [NEXT].
Check the JOB details.
When you want to change the details, click the item and
re-enter it.
REFERENCE
You can fi ne-adjust the setting positions of the JOB.
[Up] : Each click on “Up” decreases the value by 0.1
mm in the vertical direction. (Upward)
[Down]: Each click on “Down” increases the value by
0.1 mm in the vertical direction. (Downward)
[Left] : Each click on “Left” increases the value by
0.1 mm in the horizontal direction. (To the
left)
[Right] : Each click on “Right” decreases the value by
0.1 mm in the horizontal direction. (To the
right)
● When you want to save this JOB on the DC-616:
1. Click [DOWNLOAD].
To Next Page
Loading...
