2
65
PC Controller Setting
Retrieving a JOB
5
REFERENCE
●
Clicking [BACK] enables you to edit the items from the
last entering area to the fi rst entering area.
Or click
the text box to change and re-enter the
correction value.
● Clicking [FUNCTION] displays the functions of the
JOB.
The details of the JOB which is displayed in the upper
portion of the main menu screen is displayed.
When you created the JOB with the “WIZARD program”,
the JOB data are displayed on the “WIZARD” screen.
When you created a JOB with the “DIRECT program”, the JOB data is displayed on the
“DIRECT” screen. However, if you re-enter the data, which was created with the “WIZARD
program”, on the “DIRECT” screen, it is also displayed on the “DIRECT” screen.
When you click [SETTING] and select the [Enable re-editing Wizard JOB data] check box
on the [DEFAULT] tab, the JOB data is displayed on the “WIZARD” screen.
The JOB details appears on the “DIRECT” screen.
If you click the text box, you can re-enter the correction
value.
REFERENCE
The right warning message appears when you changed
the settings (values, functions) and did not save or
download them.
If you want to return to the menu screen, click [OK].
If you want to save or download, click [Cancel].
The selected JOB No. and JOB name are displayed in
the upper portion of the main menu screen.
Click [Start ] or [Test].
The selected JOB is processed.
When editing is complete, click [NEXT].
To Next Page
Loading...
