Duplo DC-618 - Page 32

12
Preparation Before Use
Adjust the
side guides
so that each document edge
on one side touches them.
This adjustment enables short fi nished products to be
stacked up without being turned over.
The fi gure on the right shows the front view of (A) in
step 4.
REFERENCE
REFERENCE
You can change the number of
side guides
according to that of the cards on one sheet.
1. Loosen the
thumb screw
to slide the
stopper
.
2. Remove or attach the
side guide(s)
to
decrease or increase the number of them.
Press the STOP key to eject the fi nished documents.
Attach the
back guide (for card stacker)
to the card
stacker according to the fi nished product size.
(A)
Slide the
side guides
to the ejected point of the
fi nished products.
Align the document edge with the guide.