Duplo DC-618 User Manual

74
System
Pressing and holding the CLEAR key resets the
value to the default.
Default: 5 sec
IMPORTANT
REFERENCE
• Manual Restart
: When preset count processing is
fi nished and the count becomes
0
,
the documents inside the DC-618
are processed and
Separating
is
displayed.
Pressing the START key restarts
feeding documents.
When 30 minutes have elapsed
without the START key pressed
while
Separating
is being
displayed, the DC-618 stops
operation.
• OFF
: When the count of sheets to be processed
(in the
preset count mode
) becomes
0
, the
DC-618 stops processing documents.
When you select
Automatic Restart
, a value for
Gap
Timing
is displayed.
Touch the / icon to adjust a value for
Gap
Timing
icon.
You can adjust the value in the range of 1 to 30
seconds.
When
Batch Separation
is set to
Automatic
or
Manual
, make sure that the
standby
screen of the JOB selected after
Batch Separation
is set is displayed, and
then enter the number of sheets of documents to process with the batch separation.
If the number of sheets of documents (in the
preset count mode
) with the batch
separation is not entered,
Batch Separation
is not active even if the START key is
pressed and it starts processing documents.
Note that it keeps processing documents without time intervals.
2.
Stack Priority
Set speed of a fi nished product to be ejected to the
exit tray
.
Touch the / icon to select
Speed
or
Alignment
.
Speed
: Gives priority to processing speed, which
reduces accuracy of alignment of fi nished
products.
Alignment
: Gives priority to alignment of fi nished
products, which decreases processing
speed.
◄
►
◄
►

Duplo DC-618 Specifications

General

Brand	Duplo
Model	DC-618
Category	Cutter
Language	English