101
2
1
Appendix
Specifications
Paper Curl
Due to the automated slitter function design, the paper path of the DC-645 is sensitive to paper curl.
If paper curl is causing paper jams the following are suggestions for remedying the problem:
1. Adjust the printing devices de-curler (if available)
2. Manually de-curl the stock before loading in the feed tray
3. Turn the paper over (reprogramming the job may be necessary)
4. Use different paper stock
Stacker tray capacity 140 mm
Control panel 16 letters x 2 lines LCD, LED Error indication
LCD languages English, Japanese, French, German, Italian, Spanish
Job program interface USB2.0 compliance (B type connector)
OS: Windows XP / 2000, Macintosh OS9.1~ OS10.1~
(Cable length must be within 3m.)
(The cable and computer should be prepared by customer.)
Standard features Max 80 job program memory
Proof feed mode (process 1 sheet)
Job program interface
Air knife
Skew adjustment
Double feed detection and reject
Image shift compensation with REG. mark
Automatic setup with barcode
Gutter deflector
Image shrinkage compensation
Optional module Business card module (Customer replaceable module)
Power supply 100V +/– 10% , 50/60 Hz
120VAC +/– 10% , 50/60 Hz
230VAC +/– 10% , 50/60 Hz
Power consumption 100 V 3.85 A 325 W
120 V 3.3 A 320 W
230 V 1.6 A 300 W
Operating temperature 10 – 30 degree (Celcius) / 50 – 86 degree (Fahrenheit)
Operating humidity 40% – 70%
Machine dimensions Opened: 2240 mm (W) x 750 mm (D) x 1115 mm (H)
*(When using the additional [89.6” x 30” x 44.6”]
feed tray) (with max document:
2530 mm (W) x 750 mm (D) x 1115 mm (H)
[101.2” x 30” x 44.6”]
Folded: 1630 mm (W) x 750 mm (D) x 1115 mm (H)
[65.2” x 30” x 44.6”]
Machine weight 360 kg [793 lb.] (approx)
To Next Page
Loading...
Need help?
General
