100
Product name / Model No. DC-645
Machine type Slit / Cut / Creaser Floor Stand Model
Document size Width: 210 mm – 370 mm [8.26” – 14.56”]
Length:210 mm – 650 mm [8.26” – 25.59”]
Document weight Min.: 110 gsm [30 lb Bond]
Max.: 350 gsm [130 lb Cover] <Tolerance for curl: +/–3 mm>
Document type Non coated paper, Coated paper, Laminated paper
Finishing document size Min.: 48 mm (Width) x 85 mm (Length) <Business card size>
Slitters 6 rotary slitters
(2 margin slitters in 1 module x 1,
2 center slitters in 1 module x 2)
Slit accuracy +/–0.2 mm on finished size
(+/–0.3 mm for business cards)
Margin slit width 3.2 mm – 40.0 mm from paper edge
Gutter slit width 5 mm – 15 mm (Gutter strips wider than 15 mm are output on the stacker tray.)
Cuts/document Max. 15 cuts
Min. cut length Lead edge cut: 3.2 mm
Gutter cut: 4.0 mm
Trail edge cut: 5.0 mm
Cut accuracy +/–0.2 mm on finished size
(+/–0.3 mm for business cards)
(May vary depending on crease number and crease depth.)
Crease / document Max. 10 creases
Crease accuracy +/–0.2 mm on finished size
(May vary depending on crease number and crease depth.)
Gutter deflector / document Max. 2 gutter cuts
Crease depth adjustment 3 steps (MAX., MID, MIN.)
Feeding method Belt suction
Feed tray capacity 100 mm
Stacker Drop type
Appendix
This chapter lists the specifications and an index.
Specifications
DC-645 Specifications
To Next Page
Loading...
