Duplo DC-645 - Page 43

42
○○○○○○○○○○○○○○○○○○○○○○○○○
A registration confirmation dialog
appears. Click [YES].
Tip
• When downloading JOB data to the
DC-645, the JOB data is generally
registered in the DC-645 memory. To
update the JOB data without
registering it in memory, check the
“Temporary job data” check box at
the bottom of this dialog.
The JOB data downloaded as
“Temporary job data” will be deleted
when the DC-645 is turned OFF or
when another JOB is selected. To
download (save) the JOB data,
always download the “Job data”
without “Temporary job data” check
marked, or save the JOB data on the
computer with the JOB Creator
before downloading it.
Tip
• If there is already a JOB registered
in selected job number in the DC-
645 memory, a display appears
whether to overwrite file or not.
○○○○○○○○○○○○○○○○○○○○○○○○○
Click [OK] and a display indicating
that the data was successfully sent,
appears in approximately one second.
○○○○○○○○○○○○○○○○○○○○○○○○○
The dialog appears to ask whether to
test the program.
To test the created job by running 1
document, set the document on the
DC-645 then click [TEST]. If a test is
not intended, then click [NO].
ThiscompletestheJOBcreationprocedures.
JOB Creator Settings