79
25
Troubleshooting
Message Countermeasure
CUTTER OR CREASE (J4) This is a paper jam in the cutter module or crease area.
Remove the document in the machine and press the <STOP> key.
(a P.89 “When “CUTTER OR CREASE” is displayed”)
OK Monitor Display and Jam Display
OPTIONAREAJAM(J5)
STACKERJAM(J6)
Paper jam in the optional module.
Remove the document in the machine and press the <STOP> key.
(a P.93 “When “OPTION AREA JAM” is displayed”)
Paper jam in the stacker unit.
Remove the document in the machine and press the <STOP> key.
(a P.95 “When “STACKER JAM” is displayed”)
REJECTAREAJAM(J8) Paper jam in the reject area.
Remove the document in the machine and press the <STOP> key.
(a P.98 “When “REJECT AREA JAM” is displayed”)