Caution: danger of injury
During template scanning the feed clamps move back and forth several
times.
Do not reach into the path of the feed clamps.
Folding station must be swinged out
–
Press function key “F5”.
The template is scanned.
The scanned parameters appear in the display. They are
automatically passed to the controller.
789
Info line:
aligning light barriers
–
Press “9”.
The flap clamp opens.
–
Remove the template.
–
Press function key “F1” to terminate the test program.
–
Push feed clamps backwards by hand.
–
Swivel folding station back.
–
Press the “RST” key or switch the machine off and on again.
Hint:
Light barrier S1 for left clamp
Light barrier S2 for right clamp
58
To Next Page
Loading...
