3.1.1 Transferring program data from the memory card to the controller
Machine parameters, program sequences and pocket programs can be
transferred to the memory card individually.
CAUTION:
The machine must not be switched off during the transfer of data to the
controller.
When programs are transferred from one machine to another only the
program sequences and pocket programs are transferred.
–
While the main screen is displayed insert the memory card in the
side of the controller in the direction of the arrow.
The panel with lettering must be towards the operator.
–
Select the transfer direction with the “F4” key.
–
Select the required parameter with cursor keys “ï”or“ð”.
A black background appears behind the symbol of the selected
parameter.
CAUTION: danger of breakage
The working mode is important.
Only transfer data for the correct working mode.
Machine parameters
Program sequences
Pocket programs
–
Press function key F5 .
The data transfer begins.
6
To Next Page
Loading...
