DURKOPP ADLER 745-34 - Default Chapter; Table of Contents

Contents page:
Part 4: Instructions for Programming DAC, class 745-34
Program version A 03
1. General................................................... 3
2. Operating terminal ........................................... 4
3. Memory card
3.1 Saving and loading program data ................................... 5
3.1.1 Transferring program data from the memory card to the controller ................ 6
3.1.2 Transferring program data from the controller to the memory card ................ 7
3.2 Saving and loading the language version............................... 8
3.2.1 Transferring the language version from the memory card to the controller ........... 8
3.3 Transferring the machine software to the controller......................... 9
3.4 Changing the memory-card battery .................................. 9
4. Main operating screen
4.1 Sewing and test programs: menu structure .............................. 10
4.2 Changing parameter values ....................................... 11
5. Sewing programs
5.1 Calling sewing-program parameter screens ............................. 12
5.2 Running a machine program ...................................... 13
5.3 Main screen ................................................ 14
5.4 Pocket programs ............................................. 16
5.5 Blower mode................................................ 36
5.6 Pocket sequence ............................................. 38
6. Setting and test programs
6.1 Calling setting and test programs ................................... 40
6.2 Machine parameters ........................................... 42
6.3 Machine-specific setting and test programs ............................. 48
6.3.1 Adjusting the looper-thread monitor .................................. 49
6.3.2 Initialising memory ............................................ 50
6.3.3 Checking the smoother function .................................... 51
6.3.4 Aligning the light barriers ........................................ 52
6.3.4.1 Preparing the sewing unit and feed clamps .............................. 53
6.3.4.2 Sewing unit with two light barriers for automatic angle recognition ............... 55
6.3.4.3 Sewing unit with two light barriers, left or right flap positioning ................. 57
6.3.4.4 Sewing unit with one light barrier.................................... 59
6.3.4.5 Error Display................................................ 60
6.3.5 Checking the corner-blade settings .................................. 61
6.3.5.1 Checking the corner-blade station ................................... 62
6.3.5.2 Checking the front left corner blade .................................. 62
6.3.5.3 Checking the rear left corner blade .................................. 62
6.3.5.4 Checking corner-blade movement ................................... 63