Select Meter 22
Set Point 9, 10, 11, 22, 30, 31, 32, 34-36, 40-43
Set Point Mode 10, 11, 31, 32
Setup 16-39
Source Select 34-35, 43
Specifications 7-8
Speed Control 7, 9, 11, 20, 23, 25, 26
Speed Feedback 7, 9, 10, 20, 23, 25, 26, 28, 40, 41
Speed Feedback Scaling 23-26, 40
Speed Range 7, 24, 30, 34, 36
Speed/Torque 9, 23
Start Commands 10, 17, 22, 35, 40, 43
Stop Commands 10, 17, 22, 35, 43
Status Displays 6, 7, 22
Tach Generator 5, 7, 9, 16, 20, 23, 40, 41
Tightening Torque 16
Trim Pots 21
Torque control 7, 9, 11, 22, 23, 26, 32
Torque Limit 9, 10, 18, 21, 24, 28, 32
Troubleshooting 40-41
User Units 9, 33
Weight 8
Wiring 8, 16-20
To Next Page
Loading...