SECTION 10 – INDEX
Item: Page(s)
Acceleration/Deceleration 2, 7, 24, 29
Adjustable Braking 7, 10, 20, 22, 29
Analog Inputs 10, 17
Analog Outputs 10, 18, 31
Auto Reference 9, 10, 11, 17, 22, 31, 29, 34, 35, 41, 43
Auto Restart 9, 39
Brake Amps 7, 10, 20, 22, 29, 31, 43
Brake Current Feedback 29
Clutch Amps 5, 10, 20, 22, 23, 26, 28, 31, 32, 37, 43
Clutch Current Feedback 5, 20, 26, 28
Clutch Current Limit 23
Clutch Max/Min Speed 24, 36, 41
Coast 9, 11, 24
Control Type 9, 23
Current Rating 7, 23, 24
Dimensions 8, 12-15
Discrete Digital Inputs 7, 9, 10, 17, 19, 34, 35, 37, 40
E-Stop 11, 17, 43
Enclosures 8, 15
Faults 7, 11, 16, 20, 32, 36-38
Filter Values 25, 26
Follower 7, 9, 10, 17, 21, 22, 30, 35, 41, 43
General Theory 5
Installation 12-21
Jog 9, 17, 22, 29, 32, 34, 36, 43
Jumpers 20, 21, 40
Keypad and Display 5, 7, 9, 13, 14, 15, 20, 22, 40, 41
Local/Remote 9, 11, 22, 25, 32, 34, 35, 41, 43
Loss of Follower 9, 11, 29, 30
Manual/Auto 9, 11, 22, 30, 32, 34, 35, 41, 43
Maximum Process 36
Memory Reset 25, 41
Minimum Process 36
Motor Current Feedback 9, 10, 11, 18, 21, 24, 28, 29, 43
Motor Full Load Current 21, 24
Motor No Load Current 21, 24
Parameters 22-39
PID 28, 29, 41
PLC Autostart 34
PLC Run 9, 34
Potentiometer (Pot) 5, 7, 9, 10, 17, 22, 34, 35, 41, 43
Presets 7, 9, 10, 19, 22, 34, 35, 36, 43
Process Units 9, 20, 33
Pulses per Revolution (PPR) 24, 26, 41
Pulse Pickup 7, 9, 19, 20
Reference Input 5, 7, 9, 10, 17, 30, 31, 35, 38, 40, 41, 43
Relay Outputs 7, 11, 16, 20, 32
Reverse Control 9, 25, 26
To Next Page
Loading...
Need help?
General