Dynatronics dynatron solaris 705 plus - Combination Therapy Instructions; Comboplus

SOUNDHEAD OPTIMIZATION ADDING OR REPLACING SOUNDHEADS
DYNATRON SOLARIS
®
PLUS SERIES | SERVICE MANUAL REV. 6 | AUGUST 29, 2017 83
Soundhead Optimization
Adding or Replacing
Soundheads
Entering Parameters for Solaris Plus 708 and 709
To ensure soundhead output is optimized, please carefully follow the instructions provided. If you have any questions about
the following instructions, contact Dynatronics’ Customer Service Department before proceeding ((800) 874-6251).
1. Head Calibration Printout.
Soundheads are shipped with a Head Calibration Printout sheet. e sheet contains calibration numbers unique
to the each specic soundhead. e soundhead serial number appears on the sheet to assist in matching the correct
soundhead with the printed parameters. e printout should be kept for future use.
CAUTION
Soundheads CAN successfully be moved between dierent Solaris devices ONLY if the parameters for that soundhead
are entered into the device. Entering parameters ensures the optimization of soundhead output.