Messages and Alerts
9-14 SkyView SE Pilot’s User Guide - Revision I
Spoken Alert
(if configured)
Message Displayed in
Message Window
Autopilot servo is unable to move
controls in direction commanded
by autopilot. Slip messages are
generally transient.
The aircraft is approaching the
bugged altitude.
Altitude is within 200 feet of the
MIN bug.
The aircraft is within 30 seconds
of an upcoming SkyView flight
plan waypoint (except the final
waypoint).
The roll or pitch autopilot axis has
been engaged.
The roll and pitch autopilot axis
has been disconnected.
The autopilot roll mode has
changed since it was engaged.
This includes sequencing onto an
armed mode.
"Autopilot Roll
Disconnect"
The roll autopilot axis has been
disconnected
"Autopilot Pitch
Disconnect"
The pitch autopilot axis has been
disconnected
The aircraft is configured with
retractable gear and the landing
gear is up, and the aircraft is
descending through the
configured minimum warning
speed.
Indicated airspeed is exceeding
Vfe (and flaps are at least partially
deployed)
A new flight plan has been
received by SkyView from an
external flight plan source (such
as a mobile app).