Dynon SkyView SE - Page 99

Messages and Alerts
SkyView SE Pilot’s User Guide - Revision I 9-13
Spoken Alert
(if configured)
Message Displayed in
Message Window
Visual Alert
(severity)
Description
"Roll Slip"
ROLL SLIP
Autopilot servo is unable to move
controls in direction commanded
by autopilot. Slip messages are
generally transient.
"Switch Fuel Tank"
SWITCH FUEL TANK
The optionally-configured fuel
tank timer has reached its pre-
configured time or fuel quantity
consumption limit.
"Message"
SYSTEM EVENT: SEE
SETUP
SkyView has logged a system
event for the Dynon diagnostic
file. Contact Dynon Avionics for
instructions on how to provide
Dynon with a diagnostic file for
review.
"Message"
TAIL # MISMATCH
Tail numbers differ between
SkyView displays – system
settings will not properly
synchronize.
"Timer Expired"
TIMER EXPIRED
A user-determined timer has
expired.
"Message"
Wi-Fi Offline
The Wi-Fi Adapter is currently
offline.
"Message"
XPNDR ALT ENCODER
FAIL
Altitude is not being sent to the
SV-XPNDR-261/262 because it is
not available from its nominal
barometric altitude source.
"Message"
XPNDR ERROR
The transponder has detected a
problem and notified SkyView.
The transponder may not function
correctly.
See Transponder Errors for
information about specific
transponder errors.
"Message"
XPNDR FAIL
The transponder has failed.
"Message"
XPNDR HEX CODE NOT
SET
A SkyView Transponder or ADS-B
receiver is installed but the HEX
Code has not been set.
"Message"
XPNDR NOT IN ALT
MODE
The aircraft is in flight and the
Transponder is not in Alt Mode.
"Message"
YAW SERVO OFFLINE
The yaw autopilot servo has
stopped communicating with
SkyView, or autopilot servos are
not receiving power.