EasyManua.ls Logo

Dynon SkyView SE - Page 98

Dynon SkyView SE
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Messages and Alerts
9-12 SkyView SE Pilot’s User Guide - Revision I
Spoken Alert
(if configured)
Message Displayed in
Message Window
Visual Alert
(severity)
Description
"Message"
BACKUP BATT LOW
CHARGE
The backup battery connected to
the SkyView display has a low
charge but is not in use.
"Message"
BATTERY TEST NEEDED
A year or more has passed since
the last successful backup battery
test, or the last three SkyView
shutdowns were abnormal.
"Message"
CHECK BARO SETTING
The current BARO setting, and
the nearest METAR-based
altimeter setting are more than
.1 inHg apart. Or the aircraft
has descended below FL180
and the BARO should be reset.
"Message"
COM RADIO PNL
OFFLINE
The COM radio control panel is no
longer communicating with
SkyView.
"Message"
COM XCEIVER OFFLINE
The COM radio transceiver
module Is no longer
communicating with SkyView.
"Minimums"
None
On PFD:
Minimums bug
appears on
Altimeter
Airplane has descended below set
MINIMUM altitude.
"Message"
NO ADSB OUT: GPS
LOST
The GPS source that provides GPS
position to the SV-XPNDR-261 for
ADS-B Out use is offline.
"Message"
OEM CONFIG
MISMATCH
OEM-customized displays are not
in sync with each other.
"Message"
PITCH SERVO OFFLINE
The pitch autopilot servo has
stopped communicating with
SkyView, or autopilot servos are
not receiving power.
"Pitch Slip"
PITCH SLIP
Autopilot servo is unable to move
controls in direction commanded
by autopilot. Slip messages are
generally transient.
"Message"
ROLL SERVO OFFLINE
The roll autopilot servo has
stopped communicating with
SkyView, or autopilot servos are
not receiving power.

Table of Contents

Other manuals for Dynon SkyView SE

Related product manuals