167
Main Menu with Transparency command selected.
To adjust Menu Transparency level:
Press
MENU|MENU|↓ to TRANSPARENCY|ENT. The TRANSPARENCY slider bar
appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius) and heading (true or magnetic) units. To change the units:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
Main Menu, System Setup submenu, left; Units of Measure Menu, right.
To set Unit of Measure: Use ↑ ↓|ENT to select the unit of measure in
the desired category. With the desired unit of measurement high-
lighted, press
ENT. After the option is set, press EXIT|EXIT|EXIT to re-
turn to the page display.
To Next Page
Loading...
