2. Push and hold the retract all jacks
button (1) until the hydraulic pump
stops.
Use the inclination function
Use the inclination function to empty the dirty-water tank. There is a maximum inclination so the wheels
do not lift off the ground. The inclination function is available for the left side and the right side of the
vehicle. For the front side or the rear side, the settings must be added by the dealer.
1. On the touchscreen, push
AUTOMATIC
(1).
2. Push the inclination button (1).
✓ The vehicle moves to the position as
programmed by your dealer.
0001 43
US
To Next Page