EasyIO FW Series – Network Connectivity v2.0
7
Network and Wireless
EasyIO FW series has an onboard wireless module and 2 ethernet ports.
Wireless Network (Wi-Fi)
The wireless module comply to IEEE 802.11 standards.
It supports IEEE 802.11 b/g/n standard.
Each unit is supplied with two (2) 2dBi RP-SMA female jack antenna.
Antenna supplied are Omni Direction antenna where it emits its radio signal equally in all direction in a
single plane.
Make sure both antennas are used for best performance.
If antenna is not install Wi-Fi scanning will fail.
Position the antenna where it in parallel to access point antenna.
To Next Page
Loading...
