EasyIO FW Series Connectivity Guide

EasyIO FW Series – Network Connectivity v2.0
9
Each FW Series Wi-Fi has preset at factory Wi-Fi access point ID (SSID).
Each unit has 2 Wi-Fi Access Point, main SSID (SSID 1) and secondary SSID (SSID 2).
By default secondary SSID is hidden.
SSID 1 : FW-xxxx , where xxxx is the last 4 digit of the MAC address 01.
SSID 2 : Conf-xxxx , where xxx is the last 4 digit of the MAC address 01.
Mac Address label located at the bottom casing top right hand corner of each FW series controller.
The MAC address label is available on the circuit board as well , above the ethernet ports.
Password for both SSID is 12345678.
** Please change the password to secure the connection**

EasyIO FW Series Specifications

General

Brand	EasyIO
Model	FW Series
Category	Controller
Language	English