Application Example: Operating a C441 Motor Insight with a Siemens PLC on PROFIBUS-DP
C441 PROFIBUS Module User Manual MN042002EN—July 2015 www.eaton.com 59
In the new watch table that should now be displayed, add the I/O addresses for the C441 Motor
Insight. Note that the names for these addresses that you entered into the PLC Tags area are
automatically populated as the addresses are entered. This watch table will allow testing the C441
Motor Insight over PROFIBUS without writing a program. This will allow monitoring the input data
from the C441 Motor Insight, while operating the C441Q/S outputs.
To Next Page
Loading...
