80 Amended: Sept 21
Fig 72
6. In the ‘Receive file’ box use the ‘Browse’ button to select where the file is to be saved –
generally ‘My Documents’.
7. In ‘Use receiving protocol’ choose ‘Xmodem’ then hit ‘receive’.
8. When the ‘receive filename’ box appears give the file a name and click ‘OK’
9. Go to the panel and select ‘Send analogue value or Log to PC, choose a loop to be
transmitted hit ‘OK’
10. Another box will appear showing the status of the download.
11. Once the file has been downloaded then this can be accessed for reading or printing by ‘right
click’ on the file and ‘Open with’ Microsoft Word.
The ability to download the Log and Analogue levels to PC has been further enhanced by adding the
facility to use Site Installer to achieve the same results.
2 Commands have been put into the user menu 2214 – ‘Download log to PC’ and ‘download
analogue values to PC’. Touch the required box and then ‘send’. The screen will display ‘waiting for
PC’.
To Next Page
Loading...
