Eaton i-on Series - Appendix VI: Using a 703 Transmitter

i-on Range
Page 154
Appendix VI: Using a 703 Transmitter
For the i-on16, i-on40, and i-onEX systems fitted with radio expander, it is possible to
program the control unit to learn the identity of a 703r transmitter.
703r will operate in the following modes:
Mode 4
Two zones with normally closed contacts on both alarm and tamper.
Mode 5
Two zones with normally open alarm contacts and normally closed tamper
contacts.
Note: Modes 1, 2, 3 and 6, 7, 8 are NOT compatible with any i-on control unit.
Please read the 703r Installation and Programming Guide for more information.