Eaton i-on Series - Factory Defaults

i-on Range The Installer Menu
Page 39
MENU Option
Factory Default
Notes
Zone tampers
Grade 2: Yes
Grade 3: No
For INCERT approval set to NO.
System tampers
No
Confirmation
(-EUR Version)
EUR versions always use Basic
Confirmation.
Sounder on
Unconfirmed
Siren on
Unconfirmed
Confirmation
(-UK Version)
Confirmation Mode
DD243
Not available for EUR versions.
BS8243
Default for UK systems.
Not available for EUR versions.
Basic
Confirmation time
30 minutes
Visible for DD243 or BS8243.
Can be adjusted between 1 and 60
minutes. Note that only values of
30 minutes or more comply with
DD243 or BS8243.
After Entry
1 zones
Visible for DD243 or BS8243.
Default changes to 2 zones when
Confirmation Mode = DD243.
Entry Keypad Lock
Off
Visible for DD243 or BS8243.
Sounder on
Unconfirmed
Visible for DD243, BS8243 and
Basic.
Siren on
Unconfirmed
Visible for DD243, BS8243 and
Basic.
Unconfirmed reset
User
Visible for DD243 or BS8243.
Confirmed reset
Installer
Visible for DD243 or BS8243.
HUA Confirm time
8 hours
Visible for BS8243 only. Must be
between 8 and 20 hours in order to
comply with BS8243:2010
Tamper as Tamper-only
Enabled
Profiles
16 40
Masking
Grade 2: Off
Grade 3: On
30 40 50 160 Masking
“ON” is required in order to comply
with EN50131-1, 8.2.1.
Mask Override
On
30 40 50 160 Appears
only when Masking is On.
Language
English
This option does not appear in UK
versions.
Restore Defaults
Staged defaults
30 50 160
i-on30EX cannot change to 6-digit
user codes.
Factory defaults
Country Defaults
Appears on EUR systems only, as
part of Factory Default process.
Installer Name
“Installer”
Required for web browser login.
Installer Code
Grade 2: “7890”
Grade 3, “567890”
i-on16, i-on30EX, and i-on40
Grade 2 only.
Keypad text
Depends on control unit type.
Remote needs Entry
Disabled
Remote Entry PrtSt
Disabled
RKP needs Entry
Disabled
RKP Entry PrtSt
Disabled
HUA Response
Audible
Appears here only in part setting
system.
Auto Rearm
Never
This setting is required in order to