i-on Range The Installer Menu
Page 37
Appears when Pulsed set to “Yes”.
Appears only in a Part Setting
system.
Appears only if Exit Mode is “Final
Door”, “Lock Set” or “Exit
Terminate”.
Appears only if Exit Mode is
“Timed Set” or “Silent Set”.
To comply with EN50131-1 Clause
8.3.8.2, maximum is 45s
To comply with EN50131-1 Clause
8.6 minimum is 90s, maximum is
15mins.
Appears only if Exit Mode is “Final
Door”, “Lock Set” or “Exit
Terminate”.
Appears only if Exit Mode is
“Timed Set” or “Silent Set”.
The maximum time permitted by
EN50131-1 Clause 8.3 is 45
seconds.
To comply with EN50131-1 Clause
8.6 minimum is 90s, maximum is
15mins.
This setting is required in order to
comply with EN50131.
Appears only in a Partitioned
system (not on i-on16)
All partitions higher than 1 default
to the same exit mode as partition
1.
Appears only if Exit Mode is “Final
Door”, “Lock Set” or “Exit
Terminate”.
Appears only if Exit Mode is
“Timed Set” or “Silent Set”.
The maximum time permitted by
EN50131-1 Clause 8.3 is 45
seconds.
Appears here for partitioned