Eaton i-on Series - External Sirens

i-on Range The Installer Menu
Page 35
MENU Option
Factory Default
Notes
Enable Keypad
Yes (all keypads enabled)
30 50 160
Keypad K1-51...K1-95
Display shows keypads currently
addressed on bus.
Replace Keypad
30 50 160
Keypad K1-51...K1-95
Display shows keypads currently
addressed on bus.
Radio Keypads
Add/Del Radio Keypad
Edit Keypads
Radio Kpd 01...20
Total number of radio keypads
depends on control unit type.
Name
“Radio Kpd 0n”
Partitions
Partition 1
Appears only in a Partitioned
system.
Key A
Name: “Key A”
Setting: Partition 1 Full Set
OR Full Set in a Part Setting System
30 40 50 160
Appears only in a Partitioned
system.
Key B
Name: “Key B”
Setting: Partition 2 Full Set
OR Part Set B in a Part Setting System
30 40 50 160
Appears only in a Partitioned
system.
Key C
Name: “Key C”
Setting: Partition 3 Full Set
OR Part Set C in a Part Setting System
30 40 50 160
Appears only in a Partitioned
system.
Key D
Name: “Key D”
Setting: Partition 4 Full Set
OR Part Set D in a Part Setting System
30 40 50 160
Appears only in a Partitioned
system.
External Sirens
Add/Delete Ext. Siren
Edit external siren
Siren 01...20
Siren numbers depend on panel.
Name
30 50 160
Partitions
Partition 01
Appears only in a Partitioned
system.
Info Modules
40
Teach Info Module
Updates
Ready-to-set LED
WAMs
30 40 50 160
Add/Del WAM
Edit WAM
2 OUTPUTS
Radio outputs
Add Outputs
Edit Outputs
O/P 1...04/08
Name
Type
O/P 01
...
O/P 04/08
Not Used
16 40
i-on16 has four radio outputs, i-
on40 has eight.
Exp. R1>nn>01...08
Name
Type
O/P R1>00>01
...
O/P R1>00>08
Not Used
30 50 160
Pulsed
No
Partitions
Appears only in a Partitioned
system. All outputs allocated to all