User Menu Options
Page 57
2. Press or to select the output.
3. Press or to switch the output on or off. Outputs operated via
radio may take several seconds to change state.
4. Press repeatedly to exit.
Using the About options
If you are a master or admin user, you can use the About option to find
information about the system you are using. The About menu contains the
following options:
Panel This gives:
The control unit model (e.g. i-on40H+).
The control unit's software (firmware) and
bootloader version number.
The installed languages and their versions.
Whether the control unit is in partitioned or part-
setting mode (if applicable).
Cloud This gives information about the connection to the
SecureConnect.
Expanders (Not available for i-on Compact.) For each expander,
this gives the expander's address, its type and the
version of software (firmware) installed.
Keypads (Not available for i-on Compact.) For each keypad, this
gives the keypad's address and the version of software
(firmware) installed.
Comms This gives information about any plug-on
communications module fitted and the control unit's
Ethernet connection. If required, please ask your
installer for details about the information displayed (as
documented in the Configuration Guide).
To use the About option:
1. Select About.
The following is displayed:
To Next Page
Loading...
Need help?
General
