User Menu Options
Page 35
the partitions allocated to a master user, since
master users always belong to all partitions.
Every user must belong to at least one partition.
Code To change your own access code.
Prox Tag To add or delete your own proximity tag.
Remote To add or delete your own remote control.
If you are using a partitioned system and a two-
way remote control, you can use the Remote
Partition option to specify the partition that the
remote control can set, unset, etc. Use or to
scroll through the partitions, and to choose
Yes or No. Press on completion.
Use Delete Remote to delete your remote control
if it has been lost.
Hold Up Alarm To add or delete your own HUA transmitter.
Remote Password To set the remote password for a BMS or level-4
user.
App access To enable or disable use of the SecureConnect
mobile app.
3. Follow the prompts. Please refer to "Adding users" on page 31 if you
need information about how to use any of the above options.
Deleting users
If you are a master or admin user, you can use the Users – Delete User
option to delete users.
Once you delete a user, the system does not respond to their access code.
The control unit also deletes the identity of any proximity tag, remote
control or HUA transmitter assigned to the user.
Note: You cannot delete User 001 (the default master user).
To delete a user:
1. Select Users – Delete User.
2. Press or followed by to select the user you wish to delete.
Alternatively, enter the user number (e.g. 004) and press .
To Next Page
Loading...
Need help?
General
