User Menu Options
Page 33
8. You are prompted to assign a radio HUA (Hold-Up Alarm) device
(except for shunt, duress and BMS users):
Press a button on an unallocated HUA transmitter until you see "HUA
added", or if you do not want to assign one.
Note: If you have an HUA transmitter that is already allocated, you
can find out who it belongs to by using Test – Hold Up Alarms (page
37).
Note: While you are registering a new HUA transmitter, the control
unit will not respond to an alarm signal from any radio HUA it has
already learnt.
9. If you are adding a shunt code user, press or followed by to
select the shunt group to assign to the user:
The * indicates the currently-selected shunt group.
10. The control unit confirms that the user has been added:
Editing users
Editing another user's details
To edit another user's details (such as the user's name or type), you must
log in as a master or admin user and select Edit User from the Users menu.
Edit User is available only if you have logged in as a master or admin user.
You can use Edit User to change a user's name, user type, allocated
partitions (if applicable) and access to the SecureConnect app.
Note:
Only master users can edit the details of other master users, and even
then, only the name and app access settings can be changed.
If you are an admin user, you can edit only those users who belong to
the same partitions as you.
To Next Page
Loading...
Need help?
General
