Installation
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
25
"
EPS2 or EPS5
#
Battery cable connected from BATT1 to
first battery module in group 1
$
Battery cable connected from BATT2 to
first battery module in group 2
%
Group 2 battery modules (connected
together)
!
Group 1 battery modules (connected
together)
&
Connector for next battery module, if
required (maximum 5 per group, 10 total)
Step 5 - Switch off the battery circuit breakers
Procedure complete
See Battery Care on page 55 for details of battery maintenance.
To Next Page
Loading...
