Eaton SM65 - Mounting Options; Rack-Mounted Version (Standard Option); Rack-Mounted Version (Slider Magazine Option)

SM65 Supervisory Module Handbook
4
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
Mounting Options

Caution
•
If the SM65 is installed in a closed or multi-unit assembly ensure that the ambient temperature is
less than 70°C [158°F].
• Ensure that the airflow is not restricted.
• Ensure that the weight of the SM65 is adequately and evenly supported.
• Take note of the maximum DC input current stated in the SM65 product datasheet.
• Ensure that reliable earthing is maintained. Carefully check earth continuity from the branch
circuit to the SM65.
Rack-mounted version (standard option)
Standard mounting brackets and screws are used to mount the SM65 supervisory module in
either a 19-inch (SM60MTG-A00) or 23-inch (SM60MTG-A02) rack. Support the cable loom as
appropriate when this mounting option is used.
Rack-mounted version (slider magazine option)
An optional slider magazine (SM60MTG-A01) with integrated cable support tray can be used
for mounting the SM65 supervisory module. This mounting option provides easy access to
the rear interface connections and supports the cable loom.
"
Cable support tray
#
Locking screw retainer
$
Slider
%
Supervisory module
retaining screws