Operation
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
17
Reset Battery State
Requires SM65 version 4.04 or later.
This function cancels any Fast Charge or Equalize control function that is Pending, and sets
the Ah Discharged counter to zero.
► To Reset Battery State using the SM65 keypad
1 Press: to go to Status View Mode.
2 Press 6 until the display shows Reset Battery State.
Reset Battery State will only be displayed if there is a pending Fast Charge or Equalize.
3 Press 8 to start Reset Battery State.
To Next Page
Loading...
