SM65 Supervisory Module Handbook
2
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
SM65 Supervisory Module
The SM65 supervisory module is an advanced control and monitoring solution for Eaton DC
power systems with up to 126 Network Power Rectifiers (NPR type) or 24 Access Power
Rectifiers (APR/APU type). It provides a full suite of advanced communications options,
including built-in Ethernet interface, Web server and SNMP agent.
The SM65 is available either as a 1U high, 19-inch rack mount module with integrated
keypad and LCD display, or as a panel mount module with separate keypad and LCD
display.
The SM65 is fully configurable with all system operating parameters stored in a
configuration file. Only minimal on-site configuration file changes are required, before an
SM65-based power system is ready for operation. Configuration file changes can be made
with the keypad, with a PC connected to the RS232 serial interface, or remotely from a PC
with the DCTools or PowerManagerII software.
The SM65 has an onboard audible indicator and two alarm LEDs. Alarms may be mapped to
the user-configurable alarm relays to activate an external fault indication monitoring system.
Alternatively, the SM65 can communicate alarms and status information remotely by SNMP
traps, using the DCTools or PowerManagerII software. Refer to Communications Options on
page
30 for further information.
The SM65 also supports the optional add-on SiteSure input/output expansion modules (see
details on page
27) and CellSure battery management modules (see details on page 24).
Panel Mount Version
Rack Mount Version
To Next Page
Loading...
