Operation
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
11
Viewing System Values (Main Display Mode)
System values (as at right) can be
viewed in Main Display Mode.
If a system value is not available (for
example, because of an incorrectly
configured or disconnected battery
temperature sensor), the following is
displayed.
Refer to SM65 Keypad and Display
on page
8 for details about the other
display indicators.
"
Total rectifier current (default display)
#
Rectifier output power as a percentage of
total available power
$
Individual rectifier currents. Only six
individual rectifier currents are displayed
at once. If more than six rectifiers are
installed, press 7 or 6 to scroll through
the list.
To Next Page
Loading...
