EasyManua.ls Logo

EBS PX200N - User Password; DNS1 and DNS2; Main Server Parameters; Server IP Address

EBS PX200N
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PX200N_Manual_en-1.11i7 Page 22 / 58
7.1.2.3. User password
When using public APN , user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
Note : Private APN provides for higher system security.
7.1.2.4. DNS1 and DNS2
It determines address of main and backup DNS server (Domain Name System).
If IP server address has been entered in form of domain it is required to provide
minimum one DNS address.
7.1.3. Main Server Parameters
7.1.3.1. Server IP Address
It is address of receiver of monitoring system (OSM.2007) or computer where
“Communication Server” software has been installed , e.g. 89.123.115.8. This
address may be provided in domain name of server, e.g. modul.gprs.com. In this
case it is required to provide minimum one address of DNS server.
7.1.3.2. Server port
It determines server port that was selected in server for collection of data from
transmitter.
7.1.3.3. Interval between subsequent connection attempts
Programmable and equipped with SIM card device will try to make automatic
connection with server. In this field you define interval (in seconds) after which next
connection will follow if the previous connection failed.
7.1.3.4. Number of connection attempts
In this filed you determine how many times device will try to make connection to
server. If connections fail, after execution of some connection device will start
procedure of connection to back up server. This option is active only if we define
parameters of backup server.

Table of Contents

Related product manuals