1. INTRODUCTION
Transmitter GPRS type PX200N is purposed for data transmitting from electronic
security systems of facilities and other technical devices with the use of GSM
mobile phone network.
Data transmission follows via GPRS or SMS.
Due to many settings a transmitter may be applied with many systems of various
requirements. The device is basically purposed for data transmission from security
systems installed in detached houses and in small business facilities.
Additionally PX200N transmitter has got input for connection of an alarm control
panel’s phone communicator. This provides for a cheap system of data
transmission.
Communication with a monitoring station follows by GPRS/SMS mode. This device
provides an opportunity to send text messages to private mobile phones.
An advanced encoding methods like a 256 bits encoding key and AES (Advanced
Encryption Standard) provides for security of data transmission. As a result
reception of this transmission is possible with OSM.2007 monitoring receiver
system.
Furthermore there is possibility to transmit not coded messages that are to be
comprehensible by reception solutions and also by GPRS Server software.
Programming of receiver is possible:
o Locally on computer and with recommended “GPRS Transmitters
Configurator” software
o Remotely : - via GPRS connection (or SMS).
- via SMS commands
- via transmission on CSD channel
To Next Page
Loading...
