echosens FibroScan 502 touch - Page 56

EE FIBROSCAN 502 TOUCH USER MANUAL FibroScan
56
9.9.2. Logs
For a FibroScan Administrator
The log file tracks system activity and gives the operator a history of the events that occurred
during use of the FibroScan software. This tab lets you view and export the log files.
[Export] Exports the log file.
From any user account, save the Log file by pressing the [Export] button after connecting a
back-up device (usually a USB key connected to one of the device's USB ports). The file is
exported to the root directory, and its name contains:
m the device's serial number,
m the date and time the file was created.
The USB device may not be recognized immediately after insertion. In that case,
press [Export] again if an error message is displayed.
9.9.3. Service
This tab gives access to the troubleshooting options.
For an Operator
[Eject CD] To eject the CD from the drive.
For a FibroScan Administrator
[Launch To execute an ECHOSENS-certified program present on a USB storage
Program] device.
20) A removable USB device must be connected.
[Probe Displays the characteristics of the probes connected to the device.
Memory]
[Screen —
Calib.] Touch screen calibration.
[Check :
Disk] Hard disk check.
[Clear Clears the database. Note that the examination files remain
Database] physically present on the hard disk.
Upgrade : . . .
DS Update of device software using a USB device supplied by Echosens.
Remote Enables Echosens to access your device remotely. Once launched, make
Access a note of the TeamViewer identifier so you can pass it on to your
Echosens contact person.
03/2017 - ECHOSENSTM AND FIBROSCAN® ARE TRADEMARKS © COPYRIGHT ECHOSENS - ALL RIGHTS RESERVED E300M017.4