echosens FibroScan 502 touch - Page 57

FibroScan
E300M017.4
FIBROSCAN 502 TOUCH USER MANUAL FRETE]
9.9.4. General
For an Operator
Delay before application lock
The delay before disconnection is the idle period after which the application will disconnect.
This period may range from 5 to 55 minutes.
For a FibroScan Administrator
Patient data security
If this security is activated, by default no patient data will be displayed in Archive and
Acquisition modes. In this case, to display patient list or specific patient details, click on the
[Display patients] or [Display patient details], respectively.
03/2017 - ECHOSENSTM AND FIBROSCAN® ARE TRADEMARKS © COPYRIGHT ECHOSENS - ALL RIGHTS RESERVED 57