Eclipse PRA6 Series - Installation; Introduction and Handling

Eclipse Rotary Actuator Instruction Manual 904-7/24/06
8
Installation
In this section you will nd the information and
instructions that you need to install the actuator.
Caution:
Installation and maintenance must conform
with the National Electrical Code and all other
national and local codes and authorities having
jurisdiction. The actuator must be installed by a
qualied, licensed technician.
Handling
1. Make sure that the area is clean.
2. Protect the actuator from the weather, dam-
age, dirt and moisture.
3. Protect the actuator from excessive tempera-
tures and humidity.
4. Take care not to hit or drop the actuator.
Storage
1. Make sure that the actuator is clean and in
good condition.
2. After you have made sure that everything is
present and in good condition, keep the actua-
tor in the original package as long as possible.
3. Store the actuator in a cool, clean, dry room.
introDuCtion
hanDling anD
storage
2