Eclipse PRA6 Series - Component Approval and Standards; Pre-Installation Checklist

Eclipse Rotary Actuator Instruction Manual 904-7/24/06
9
All of the electrical wiring must comply with one
of the following standards:
• NFPA Standards 70
• EN60204-1
• the electrical wiring must be acceptable to the
local authority having jurisdiction.
The NFPA Standards are available from:
National Fire Protection Agency
Batterymarch Park
Quincy, MA 02269
Information on the EN standards, and where to
get the standards is available from:
European Committee for Electrotechnical
Standardization
4, Galerie Ravenstein
B-1000 Brussels, Belgium
Access
Make sure that you install the actuator in such a
way that you have easy access to it for inspection
and maintenance.
Environment
Make sure that the local environment matches
the original operating specications. Check the
following items:
• voltage, frequency and stability of the
electrical power
• humidity, altitude and temperature of air
• presence of damaging corrosive gases in the
air.
CheCklist before
installation
Where to get the
standards
approval of
Components
Electrical Wiring