Ecolab Elados EMP IV E00 - 5 Setup; Electronic Versions E00; E10; Mounting Diagram

417101090_EMP_IV_E00_E10
- 39 -
Rev. 8-06.13
5 Setup
Fig. 5.1
Pos.
Description
1
Electrical motor connection
2
Motor
3
Oil filler opening with
overpressure cap
4
Knob for setting the stroke length
5
Oil-level gauge glass
6
Pump head
7
Pressure valve
8
Suction valve
9
Waste oil screw
10
Connection for diaphragm sensor
/ diaphragm breakage drain
Flow direction of the
metering medium
5.1 Electronic versions E00 / E10
Pos.
Description
1
Electrical motor connection
2
Mechanical stroke adjustment
3
ON – OFF switch
4
Pilot lamp
Fig. 5.2
5.2 Mounting diagram
Pos.
Description
1
Overflow valve
2
Pressure control valve
3
Replacement method: Multifunction valve
4
Suction pipe / bottom admission valve
NOTE
The metering valve, pressure control valve and
pressure relief valve can be replaced by a
multifunction valve (MFV) from our product
range, which combines all of these
functionalities.
Fig. 5.3