DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly
.
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the applicable
local regulations. Safety regulations and prescribed protective clothing when
handling chemicals should be followed. Attention must be paid to the
information included on the product data sheet for the metering medium used.
Prior to all work the feeding of the metering medium should be disconnected
and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
Safety
21 MAN049432 Rev. 03-03.2024
To Next Page
Loading...
